LED Stainless Steel Fountain Light With Stand | 6–24W | 12V | IP68
LED Stainless Steel Fountain Light With Stand is a heavy-duty underwater spotlight designed for fountains, ponds, and architectural water features where you need precise aiming without in-wall or ring mounting. Thanks to its ground-mount adjustable stand/base, this fixture is ideal for directing light toward water jets, cascades, nozzles, and focal points with full control over the beam direction.
Built for demanding wet environments, the fixture features a stainless-steel front face and a fully sealed body to deliver consistent performance under continuous submersion. It operates on 12V low voltage for safer underwater installations and carries an IP68 waterproof rating, making it suitable for permanent underwater use in fountains and feature pools. This model is available in 6W to 24W and is supplied in a single selected light option such as RGB or BWY (as specified at the time of ordering).
Key Benefits of LED Stainless Steel Fountain Light With Stand
1) Adjustable ground-mount stand for accurate targeting
Unlike fixed mounting styles, the LED Stainless Steel Fountain Light With Stand uses an adjustable base that allows you to tilt and aim the luminaire toward the exact area you want to highlight—water jets, splash zones, pond edges, or feature walls.
2) Safer 12V underwater operation
Operating on 12V reduces electrical risk in wet locations and matches common fountain lighting standards. It must be used with a compatible 12V driver (and controller for RGB versions).
3) IP68 sealed waterproof construction
With IP68 protection, the light is designed for continuous immersion, provided installation is done correctly with proper cable routing and waterproof connections.
4) Stainless steel durability in wet zones
The stainless-steel construction provides strong resistance to corrosion and supports long-term outdoor use in fountains, ponds, and decorative pools.
5) Multiple wattage options (6–24W)
Choose the right output for your project scale—smaller decorative jets or larger commercial water features.
Technical Specifications (Summary)
Product: LED Stainless Steel Fountain Light With Stand
Power options: 6W / 9W / 12W / 18W / 24W (depending on configuration)
Voltage: 12V
Waterproof rating: IP68
Mounting: Ground-mounted adjustable stand/base
Body/face: Stainless steel front with sealed construction
Light option: Single selected option (RGB or BWY)
Use case: Underwater fountains, ponds, feature pools, wet-zone architectural lighting
Typical Applications
The LED Stainless Steel Fountain Light With Stand is used across decorative and commercial projects, including:
Decorative fountains and water jets
Landscape water features in parks and villas
Hotel, mall, and plaza fountains
Ponds and feature pools
Water walls and wet-zone architectural highlights
Outdoor projects requiring adjustable underwater aiming
Installation Notes (Best Practice)
Mount on a stable surface using the base plate/stand, ensuring the fixture won’t shift due to water movement or maintenance activity.
Adjust the angle to target jets, cascades, or feature points before final tightening.
Use a proper 12V driver sized for the total wattage of your fixtures.
For RGB versions, connect through the correct RGB controller compatible with your system.
Ensure waterproof cable routing and sealed joints. Use proper underwater-rated connectors where required.
Follow site grounding and electrical standards applicable to fountains and wet locations.
Tip: Always plan cable paths to avoid tension, sharp edges, and areas exposed to repeated mechanical stress.
Post-Installation Care & Maintenance
To keep the light output strong and the finish looking premium:
Clean the lens and stainless-steel surface using a soft cloth.
Avoid abrasives and harsh chemicals to prevent scratching or dulling.
Periodically check seals and cable entry points, especially in treated/chlorinated water.
If the project includes multiple fixtures, schedule routine inspections to ensure consistent brightness and alignment.
